Home/Products/Scitek Global/Deionized Water Purifier
Sample prep & stability
Deionized Water Purifier
- Models
- WP-D10U
- Water Supply Requirement
- Tap water: TDS<200ppm; Water pressure >0.1Mpa; Water temperature: 5-45℃
- Pure Water Quality
- Conductivity
- PH value (25℃)
- None
- Oxidizable (Calculated as O)
- Technical requirements: ≦0.08mg/L; Test results: ≦0.08mg/L
This WP-D10U deionized water purifier efficiently removes ions and impurities from water to produce high purity deionised water, which is commonly used in lab analysis, electroplating, pharm…
Added to your inquiry list. It travels with your next quote request.
1 models
Product Description
Deionized Water Purifier specification across the range. Figures are the manufacturer’s published values.
| Model | WP-D10U | |
|---|---|---|
| Water Supply Requirement | Tap water: TDS<200ppm; Water pressure >0.1Mpa; Water temperature: 5-45℃ | |
| Pure Water Quality | Conductivity | 0.1us/cm (25℃) |
| PH value (25℃) | None | |
| Oxidizable (Calculated as O) | Technical requirements: ≦0.08mg/L; Test results: ≦0.08mg/L | |
| Evaporation Residue (105±2℃) | Technical requirements: ≦1.0mg/L; Inspection results: 0.7mg/L | |
| Inspection Basis | GB/T6682-2008 | |
| Consumption | 25W | |
| Water Output Speed | 10L/h | |
| Control System | Operation mode display: power, water shortage, flushing, full water, inlet water quality monitoring, RO water quality and temperature UP water quality and temperature, etc. | |
| Safety Performance | Automatically enters standby state when there is no water or low water pressure, and enters standby state when the system is full of water (constant pressure). | |
| Purification System | Pretreatment unit, external softening filter (recommended in places with high raw water hardness); 1μm deep PP filter element*2 + precision activated carbon filter element | |
| RO Reverse Osmosis Unit | American original RO reverse osmosis membrane/membrane group | |
| Post Purification Unit | Purification column | |
| Standard Accessories | Host + accessory package + 3.2G pressure barrel | |
| External Size(WxDxH)(mm) | 340x460x480mm (Water Purifier) 245x245x390 (Pressure tank) | |
| Shipping Size (WxDxH)(mm) | 535x435x550mm (Water Purifier) 245x245x360mm (Pressure tank) | |
| N.W/G.W | 23kg/25kg (Water Purifier) 2kg/3kg (Pressure Tank) | |
Specification published by Scitek Global. Confirm the exact configuration on the written quotation before ordering.
Key features
What the range offers
- The deionized water purifier has power indicator, pump work indicator, low pressure indicator and system flushing indicator functions.
- Using imported ion filtration membranes and high-pressure, silent pure water pumps, the operation quality is more reliable and it is applicable to a wider range of water quality;
- It has system flushing function: every time before turning on the water machine, di water machine will automatically flush for 30 seconds. And then the system will start to make water;
- The di water machine has system protection function: when the water pressure is too low or there is no water. The equipment automatically shuts down. The water source comes in, the equipment automatically turns on;
- The quality of the incoming water affects the quality of the outgoing water and the service life of the filter column;
- When the source water quality is poor (TDS is greater than 200ppm), the RO pure water quality will drop to above 10μs/c㎡;
- When the raw water quality TDS>500, it is recommended to use a water softener;
- Swift-change filters enable effortless and user-friendly replacements.
Next step
Tell us the capacity and the duty.
We will confirm the right model, the price and the lead time.